Schwing SP2000 Stationary Pump


SPECIFICATIONS

Concrete Output Per Hour (Rod/ Piston) 118/ 91 cu yds / 90/ 70 cu m
Maximum Pressure on Concrete (Rod/ Piston) 870/ 1568 psi / 60/ 108 bar
Maximum Aggregate Size 2.5 in / 63.5 mm
Concrete Cylinder Diameter 8 in / 200 mm
Concrete Cylinder Stroke Length 63 in / 1600 mm
Differential Piston/Rod Diameter 4.72/ 3.14 in / 120/ 80 mm
Outlet Diameter 7 in / 180 mm
Concrete Valve Type M Rock
Shifting Cylinders 2
Max. Pump Strokes Per Minute (Rod/Pison) 30/ 23
Volume Control 0 to Maximum
Hydraulic System Open Loop
Main Hydraulic Pump A11VLO190
Hydraulic Pressure 4362 psi / 301 bar
Hydraulic Tank Capacity 112 gal / 424 l
Engine Family BPKXL06.6PJ2
CAT Diesel Engine Power 173 hp / 129.5 kW
Engine Model – Diesel Tier 4 CAT 4.4L
CAT Diesel Engine Power 173 hp / 129.5 kW
Fuel Tank Capacity 53 gal / 200 l
Hopper Capacity 21 cu ft / .6 cu m
Hopper Height 61 in / 1294 mm
Axle Tandem Standard
Axle Capacity Rating 14,000 lbs / 6350 kg
Tandem Axle Tires LT 235/85 R16
Brakes Electric
Outrigger Legs Manual Standard
Length 20′ 1.5″ / 6129 mm
Width 6′ 6″ / 1929 mm
Height 8′ 6″ / 2585 mm
Unit Weight (Tier 4) 13050 lbs / 5919 kg
Remote Control Cable 100 ft / 30.5 m


Pump Specifications
Theor. Concrete Output 208 cu yds/h / 159 cu m/h
Max. Pressure on Concrete 1007 psi / 70 bar
Max. Strokes Per Minute 32
Max. Aggregate size 2.5 in / 63.5 mm
Material Cylinder Diameter 9 in / 230 mm
Material Cylinder Stroke 79 in / 2006.6 mm
Differential Cylinder Diameter 5.1 in / 130 mm
Maximum Oil Flow 105.7 gal/min / 400 l/min
Hydraulic Circuitry Type MPS
Valve Type M Rock

Specifications are subject to change without prior notice.

  • 831 Steele Dr
    Hampton, GA 30228

About Us

Cherokee Pumping is centrally located in Hampton, GA to serve contractors in central and south Georgia including the Atlanta market and eastern Alabama. Our Savannah office is fully equipped to serve south Georgia.

© Copyright Cherokee Pumping